VS-1400

---

Specifiche

Hardware       System Windows 2000 SP4 or Windows XP/Windows ME/Windows 98 Internet Explorer 6.0 DirectX 9.0c CPU: 32 Bits RISC Processor ROM: 4M Bytes Flash ROM RAM: 32M Bytes SDRAM WatchDog: Chip to monitor out tolerance system voltage and abnormal program execution Connectors 1 BNC/ S-Video input and 1 BNC loopback output 1 channel audio input (Available soon) One RJ-45 connector for Ethernet Two LEDs to indicate network and power/system status GPIO with 1 fully opto-isolated alarm input and 1 relay output Two 9-pin D-SUB connectors: 1. One RS232 serial port for external console, 2. One RS-232/485 port for PTZ (pan/tilt/zoom) camera control Network       Network Interface 10/100 Base-T Ethernet 802.11b/g Wireless LAN (Optional) Protocols TCP/UDP/IP, ARP, ICMP, HTTP, TFTP, FTP, Telnet, SMTP, DHCP, NTP, DNS, DDNS, RTSP Video       Image Compression MPEG-4 Simple Profile Video Adjustment Brightness, Contrast, Hue, Saturation, Image Quality, Image Size, Bitrate Performance 30fps at Full D1 resolution Resolutions Full D1 – 720x480 (NTSC) / 720x576 (PAL) VGA – 640x480 QVGA – 320x240 CIF – 352x240 (NTSC) / 352x288 (PAL) QCIF – 176x112 (NTSC) / 176x144 (PAL) Quarter QVGA – 160x112 Video Bitrate 16K ~ 4M bits/sec (CBR/VBR configurable) Management       Event management Triggere: 1.Time 2.Sensor Input 3.Motion Detection 4.CGI trigger Action: 1. Store video (AVI format) 2. FTP video to remote site 3. Email with video attachment 4. Relay output to control external device. Installation IP Installer (Win32 Application) Firmware Upgrade Remote upgrade by FTP or HTTP Customized web UI is upgradeable via FTP and Telnet Client PC Requirements Microsoft IE5.x or above running on Windows/ ME/ 2000/ XP Security Multi-tiered access control Recording Free 4-CH software Operating Environment       Operating Temperature 5°C ~50°C (40°F ~ 125°F) Operating Humidity 20%~80% RHG Input Voltage DC 12V, 1A Power Consumption <8 watts Mechanical Design       Dimension 194(L) X 180(W) X 43(H) mm Approvals CE/ FCC